trolling plates are even better and easier to use, there is usually some happy trollers on ebay, you just need to find the right size. a secondary benefit with these is that you can travel faster with no wake

ilucas, I usually have two people on board & fish HARD early in the season, mostly w/bait. When a salmon pulls the line out of the release clip (& is "free-spooling") 1 person handles the rod (feeds line & gives the fish time to run & swallow) while the 2nd person pulls the bucket, steers, gives useless (& annoying) advice and gets the net out. The advantage of the hole is increased drag. The BIG advantage is the bottom HANDLE & the EASE of pulling the bucket out! Christine (my 1st mate) can easily get the bucket out when it's my turn to catch. W/ a bottom handle you don't have to hold the bucket up & let the water drain out, the inverted bucket SLIPS out of the water!
If I have time, I usually pull the bucket, even when alone. 1 less thing to go wrong (Murphy's Law.) If I'm trolling faster (2-3+ mph- normally w/ spoons) I don't pull the bucket as often as the speed of the boat tends to keep the fish in a line to the transom & to one side or the other of the bucket (I hope).
Fishlessman, you may be right that trolling plates are better if you're using only one motor. But, after busting my plate...TWICE...because I forgot to release it up BEFORE advancing the throttle. Dbl Duh! (Maybe the newer ones are better & fail safe??) I got a 5 hp kicker. Uses little gas & provides a safety backup for when the big motor craps out (Murphy's Law, again.)
I use the bucket even @ higher speeds because the "Tank" is alum. w/ a ton of freeboard. The bucket keeps her going in a (mostly) predictable direction when it's windy (normally).


Hope this helps.

All the best,

Gary

Take a look at the trolling bags and info from Amish outfitters - give Frank Kittrick a call there - knows a ton about trolling bags...

Talewalker
Be out on the Big Lake fishin this weekend monitoring Ch. 12 if anyone's around...

ive broke the plate before as well, and i have the more expensive one with the springs. fortunatly i work in a welding shop. if you need it fixed send it to me. small kicker is the best option, the buckets dont work to well on my boat because of the way the front catches the wind, i get spun like a top in the wind. iverthing seems to break on a boat, last weekend i caught the line in the kicker prop, sucked the lure in and by the time i cut the engine the hook on the lure acted like a lathe tool and cut into the aluminum piece behind the prop, released all the gear oil into the lake before i knew what happened. new parts and seals go in tonight.

Geez Fishless sounds like you got some of my dumb luck LOL Here's wishing ya a great weekend fishing Maybe talk to ya on Sunday not sure yet?????? Take Care God Bless and Tight Lines LOL Dave From up North P.S. You think the wind spins you???? Man you should see how quick it spins The TUBB LMAO!!!!!!!!!!

Fishlessman,
& I was the one who refered to Murphy's Law twice in my post! WOW! Your latest adventure sound like one of my trips to the lake! Sorry about you kicker.
Very kind of you to offer to fix my trolling plate. I had the older "plastic" kind. Broke it, ordered the parts & fixed it, broke it again and said the heck with it.
The other thing that helps the "Tank" is the Trollking I installed on the kicker. You can hit the Momentary Full Throttle button and it advances the kicker so you can straighten her out if she starts to go round like a top. Been there, done that.

All the Best,

Gary

Gary,

I followed your advice drilling a 2.25 inch hole in the bucket an drug them from a ski harness. It worked perfect. It would have taken me many “trial and Error” trips to get that worked out. I see what you mean about the handle that would make it just about perfect. I am scrounging around the house today to find some foam.
In case anyone has any doubts the hole DOES increase the drag, quite about. My Dad must have ingrained more Yankee trustfulness than I had thought. I had a real hard time drilling a hole in a brand new bucket….. Glad is did.
Thanks for the advice.

Scott,
Any flat foam will work. (With flat foam the bucket will sit upright, with the handle under it, when it's back in the boat.) You could even slice up some pipe insulation type foam. Old winch strap or seat belt material works great for the handle material.
The bottom handle is the key to amazingly easy bucket retrieval.
Being a true yankee I understand about your reluctance to use a brand new bucket!
I'm glad the info helped you.

All the Best,

Gary