The best setup is to have rods set up with "in-line" leadcore. The way I set mine up is 10 lb mono backing to a very small swivel to 1, 2, or 3 colors of leadcore to a small swivel then the leader of your choice. If you set up your in line leadcore lines like this they slide down the planar lines very easily. You can run a regular leadcore line off of the planar also. I have also done this many times. It just doesn't go out as far or as easily. You can easily run 2 leadcore lines off each planar line.
Best way is 50'leader - lead core line (2,3,or how many colors u want) - colored dacron backing(use 20/30lb test,it's easy to see and release slides great).. but use backing as release slides down further, using straight lead core is to heavy causing "bow" and release won't slide as far out away from boat.
I connect with albright knots. I don't like using mono backing as you need to watch tow line/release location...one other thing, I mostly only fish otter boat out of the left (port) side of boat because more relaxing with no neck turning back an forth,also easier to run only 1 otter boat but alot run 2 otter boats which might be o.k. if you have another person helping u.....
Thanks for the help guys!
Is there any problem with running 50 feet or so of straight 6 lb. Seaguar leader from the lead to the lure or should I taper down like 50' of 8 lb flouro to 6 or so feet of 6 lb Seaguar tied to the lure?
I usually run a 50' +/- 8 lb trilene monofilament leader to a small swivel to a 8-10 foot section of 8 lb. flouro leader to a small dual snap to a lure.
Thanks fishrman! Can you tell me what benefit that has over simply running a 50' straight run of Flouro from the lead to the lure?? Is it for line twisting purposes??
Flourocarbon is real expensive. I am cheap. Monofilament is cheap. Thats why I run it. I catch my fair share of fish so I personally don't think it makes a difference.
Thanks to everyone who responded! Looking forward to setting up this planer board system and giving it a whirl! Pieces have started arriving yesterday!
Come on ice out!!!
Let me start with I'm no expert. But I have had the good fortune to fish with a few.
I have rigged my lead core lines with 10# mono backing but plan on using fly line backing (thin dacron) this year. I attach the backing to # 10 Spro swivels. They are rated for 35# and are high quality. You can see them here.
I pull back the dacron backing about 4-5" and remove the lead from inside the lead core then tie the dacron coating directly to the swivel. I then do the same on the other end which then is attached to another swivel that connects to the 50-70' of 8# mono. I then use yet another swivel to attach the 10' of 4-6# fluro which I tie directly to the lure.
These swivels are tiny and will go easily through the guides.
I am in the same boat. Ha! Ha! As I am going to be installing a Riviera Mast on my boat which I have some questions about but will post a new topic as I don't want to hijack yours.
FWIW, You may want to search the archives for leadcore and trolling masts for some ideas.